Control Link - LOGO! CMK2000

Каталог

Наши услуги

РЕШЕНИЯ

Техническое зрение

LOGO! CMK2000

Изделие: 6BK1700-0BA20-0AA0

Краткое описание:

LOGO! CMK2000 COMMUNICATION MODULE TO INTEGRATE THE LOGO! 8 IN THE BUILDING BUS KNX POWER SUPPLY DC 24V 0,04A 1 RJ45 PORT FOR ETHERNET CONECTION 50 COMMUNICATION OBJECTS TIME SYNCHRONISATION CONFIG./DIAG.PER WEB-INTERFACE

Производитель: SIEMENS

Цена по запросу.

БЫСТРЫЙ ЗАКАЗ

LOGO! CMK2000 COMMUNICATION MODULE TO INTEGRATE THE LOGO! 8 IN THE BUILDING BUS KNX POWER SUPPLY DC 24V 0,04A 1 RJ45 PORT FOR ETHERNET CONECTION 50 COMMUNICATION OBJECTS TIME SYNCHRONISATION CONFIG./DIAG.PER WEB-INTERFACE

Order number		6BK1700-0BA20-0AA0
		LOGO! CMK2000
General information
Firmware version
● FW update possible		Yes
Installation type/mounting
Mounting		on 35 mm DIN rail, 4 spacing units wide
Supply voltage
Rated value (DC)		24 V
● 12 V DC		No
● 24 V DC		Yes
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Rated value (AC)
● 24 V AC		No
Input current
Current consumption, max.		0.04 A
Power loss
Power loss, max.		1.1 W
Memory
Flash		Yes
Time of day
Clock synchronization
● supported		Yes
Interfaces
Transmission rate, max.		100 Mbit/s over Ethernet, 9 600 bit/s over KNX
Protocols
EIB/KNX		Yes
Web server
● supported		Yes
Interrupts/diagnostics/status information
Diagnostics indication LED
● RUN/STOP LED		Yes
EMC
Emission of radio interference acc. to EN 55 011
● Limit class B, for use in residential areas		Yes; In accordance with EN 61000-6-3
Degree and class of protection
Degree of protection acc. to EN 60529
● IP20		Yes
Standards, approvals, certificates
CE mark		Yes
CSA approval		Yes
UL approval		Yes
cULus		Yes
FM approval		No
RCM (formerly C-TICK)		No
KC approval		Yes
EAC (formerly Gost-R)		Yes
according to VDE 0631		No
Marine approval
● Marine approval		No
Ambient conditions
Ambient temperature during operation
● min.		0 °C
● max.		55 °C
Ambient temperature during storage/transportation
● min.		-40 °C
● max.		70 °C
Relative humidity
● Operation, max.		95 %
Connection method
Bus connector		KNX terminal 0.6 mm² - 1.0 mm²
Power supply		2 screw-type terminals: L+, M 0.5 mm² - 2.5 mm² Screw-type terminal: FE 0.5 mm² … 6.0 mm²
Dimensions
Width		71.5 mm; 4 WU
Height		90 mm
Depth		58.5 mm
Weights
Weight, approx.		0.14 kg

Обзор

Logo! CMK2000

Expansion module for LOGO! 8 basic versions
For integrating LOGO! 8 in KNX installations
With 24 digital inputs, 20 digital outputs as well as 8 analog inputs and outputs for processing process signals via KNX.

Область применения

The LOGO! CMK2000 communication module can be used to integrate the LOGO! 8 series of logic modules in the KNX building system bus. LOGO! 8 is designed for smaller automation solutions. It can now be used in combination with the new communication module for building automation tasks, such as surveillance, access control, air-conditioning, lighting, shading and watering through to pump control.

Функции

The LOGO! CMK2000 KNX module communicates via Ethernet with LOGO! 8. It transmits sensor data from KNX bus nodes to the logic module, where they are combined with logic functions. LOGO! control commands are transmitted to KNX actuators via the communication module. 50 KNX communication objects can be configured, and linked in the LOGO! program with counters, setpoints, and parameters to create automation solutions.

LOGO! 8 also makes its own functionality available to the other KNX nodes via the LOGO! CMK2000 communication module. There are 24 digital inputs, 20 digital outputs as well as 8 analog inputs and outputs in the maximum hardware configuration. LOGO! 8 also enables the date and time to be synchronized for the nodes in the KNX system.