LOGO! CMK2000 COMMUNICATION MODULE TO INTEGRATE THE LOGO! 8 IN THE BUILDING BUS KNX POWER SUPPLY DC 24V 0,04A 1 RJ45 PORT FOR ETHERNET CONECTION 50 COMMUNICATION OBJECTS TIME SYNCHRONISATION CONFIG./DIAG.PER WEB-INTERFACE
|
Order number |
6BK1700-0BA20-0AA0 | |
|---|---|---|
|
LOGO! CMK2000 | ||
|
General information |
|
|
|
Firmware version |
||
|
Yes |
|
|
Installation type/mounting |
|
|
|
Mounting |
on 35 mm DIN rail, 4 spacing units wide |
|
|
Supply voltage |
|
|
|
Rated value (DC) |
24 V |
|
|
No |
|
|
Yes |
|
|
permissible range, lower limit (DC) |
19.2 V |
|
|
permissible range, upper limit (DC) |
28.8 V |
|
|
Rated value (AC) |
||
|
No |
|
|
Input current |
|
|
|
Current consumption, max. |
0.04 A |
|
|
Power loss |
|
|
|
Power loss, max. |
1.1 W |
|
|
Memory |
|
|
|
Flash |
Yes |
|
|
Time of day |
|
|
|
Clock synchronization |
|
|
|
Yes |
|
|
Interfaces |
|
|
|
Transmission rate, max. |
100 Mbit/s over Ethernet, 9 600 bit/s over KNX |
|
|
Protocols |
|
|
|
EIB/KNX |
Yes |
|
|
Web server |
|
|
|
Yes |
|
|
Interrupts/diagnostics/status information |
|
|
|
Diagnostics indication LED |
|
|
|
Yes |
|
|
EMC |
|
|
|
Emission of radio interference acc. to EN 55 011 |
|
|
|
Yes; In accordance with EN 61000-6-3 |
|
|
Degree and class of protection |
|
|
|
Degree of protection acc. to EN 60529 |
||
|
Yes |
|
|
Standards, approvals, certificates |
|
|
|
CE mark |
Yes |
|
|
CSA approval |
Yes |
|
|
UL approval |
Yes |
|
|
cULus |
Yes |
|
|
FM approval |
No |
|
|
RCM (formerly C-TICK) |
No |
|
|
KC approval |
Yes |
|
|
EAC (formerly Gost-R) |
Yes |
|
|
according to VDE 0631 |
No |
|
|
Marine approval |
|
|
|
No |
|
|
Ambient conditions |
|
|
|
Ambient temperature during operation |
|
|
|
0 °C |
|
|
55 °C |
|
|
Ambient temperature during storage/transportation |
|
|
|
-40 °C |
|
|
70 °C |
|
|
Relative humidity |
|
|
|
95 % |
|
|
Connection method |
|
|
|
Bus connector |
KNX terminal 0.6 mm² - 1.0 mm² |
|
|
Power supply |
2 screw-type terminals: L+, M 0.5 mm² - 2.5 mm² Screw-type terminal: FE 0.5 mm² … 6.0 mm² |
|
|
Dimensions |
|
|
|
Width |
71.5 mm; 4 WU |
|
|
Height |
90 mm |
|
|
Depth |
58.5 mm |
|
|
Weights |
|
|
|
Weight, approx. |
0.14 kg |
|
Logo! CMK2000
The LOGO! CMK2000 communication module can be used to integrate the LOGO! 8 series of logic modules in the KNX building system bus. LOGO! 8 is designed for smaller automation solutions. It can now be used in combination with the new communication module for building automation tasks, such as surveillance, access control, air-conditioning, lighting, shading and watering through to pump control.
The LOGO! CMK2000 KNX module communicates via Ethernet with LOGO! 8. It transmits sensor data from KNX bus nodes to the logic module, where they are combined with logic functions. LOGO! control commands are transmitted to KNX actuators via the communication module. 50 KNX communication objects can be configured, and linked in the LOGO! program with counters, setpoints, and parameters to create automation solutions.
LOGO! 8 also makes its own functionality available to the other KNX nodes via the LOGO! CMK2000 communication module. There are 24 digital inputs, 20 digital outputs as well as 8 analog inputs and outputs in the maximum hardware configuration. LOGO! 8 also enables the date and time to be synchronized for the nodes in the KNX system.
Изделие: 6GK7177-1MA20-0AA0
Компактный коммуникационный модуль LOGO! CSM12/24 до 3 доп пользователей в IND. ETHERNET с 10 / 100 Мбит / с 1X порт для диагностики ИП 12/24 В
Изделие: 6GK7142-7BX00-0AX0
LOGO! CMR2020 COMMUNICATION MODULE FOR CONNECT. LOGO! 0BA8 TO GSM/GPRS NET; 1 RJ45 PORT FOR IND. ETHERNET-CONECTION TO LOGO! 0BA8; 2XDI;2XDO; READ/WRITE-ACCESS TO LOGO!-VARIABLES; SMS SEND/RECEIVE; POSITION RECOGN. GPS; TIME SYN./FORWAR- DING WITH REAL TIME CLOCK; CONFIG./DIAG.PER WEB-INTERFACE; NOTE NATIONAL APPROVALS! MANUAL AVAILABLE AS DOWNLOAD.
Изделие: 3RK1400-0CE10-0AA2
КОММУНИКАЦИОННЫЙ МОДУЛЬ LOGO! CM: ДЛЯ ПОДКЛ. ЛОГИЧЕСКИХ МОДУЛЕЙ LOGO! К AS-INTERFACE И ВЫПОЛНЕНИЯ ФУНКЦИЙ ВЕДОМОГО УСТРОЙСТВА. 4 ВИРТУАЛЬНЫХ DI, 4 ВИРТУАЛЬНЫХ DO. ГАЛЬВАНИЧЕСКОЕ РАЗДЕЛЕНИЕ ЦЕПЕЙ СО СТОРОНЫ ВХОДНОГО УЧАСТКА ВНУТРЕННЕЙ ШИНЫ
Изделие: 6GK7177-1FA10-0AA0
Коммуникационный модуль CSM 230 для LOGO! (Неуправляемый коммутатор, 4 Х 10/100 Мбит порта RJ45, 115 ... 240 В AC / DC)
г. Алматы, Ауэзовский район
ул. Толе Би 302, Литер "Д"
офис № 205
+7 (727) 268-0321
+7 (701) 082-9486
+7 (707) 493-7210
+7 (727) 268-0321
info@controllink.kz
